Hi Everyone, I bought a Focus 1.6 TDCI 05 reg, second hand about a year ago and its done 130k miles. Ive replaced the air filter and a complete oil change myself, but a few weeks ago I started having problems. Ford mondeo 1.6 tdci 2012 engine malfunction and traction light on Ford mondeo 1.6 tdci 2012 engine malfunction and traction light on Actually I had a focus that Some help needed please! I have a Focus Estate MK2 1.6 TDCi, and recently it's developed a fault where after taking engine revs over around 2000rpm, and then depressing the clutch to change gear, the engine will stall. It can go a little over 2000, but not much. When it stalls, the engine restarts, but it has to turn over a few times before it Morning, looking for some help. I have just purchased a Connect 1.6TDCi 115ps 2015my, 89834 miles. after 2 days the temp warning light came on red and the coolant fan was running on after engine stop. Also temp gauge stopped working. Checked the reservoir and it seemed very dark and empty, remove I've decided to give up lurking and start posting as I have a bit of an issue with my Focus 1.6 TDCI. 109. The car is a 08 plate, one of the few facelifts on the 08 plate. The engine has done Hi peeps, hoping some advice can help me. 2012 mk3 focus 1.6L diesel model. Engine is running rough / mis-firing, engine management light came on, I checked and cleared the fault codes with my ForScan and the EML cleared but the car was still undriveable as still mis-firing. Fault code = P1263 - Earlier this year my father purchased a 2004 MK3 Ford Mondeo Estate Ghia with the Duratorq 2.0 TDCi 115hp engine. The car had done 110,000 when he bought it and had a full Ford service history. Seemed like a good buy and I recommended it to him and even lent him some cash for it. But it's been a heap of trouble, it's had the following problems; Posted February 17, 2022. I recently changed the injector to cylinder 2 after a breakdown (code P1262) with a replacement part from Ford. Easy enough change and correction codes entered using FORScan and an OBD2. Since changing the errors have gone and codes cleared themselves but the cars not right. SwUSBZB.